1. High Gloss Cutting Process
Use a precision engraving machine to cut certain parts on the aluminum alloy surface so that these cutting surfaces show highlighted areas.
2. Sand Blasting
The impact of high-speed sand flow is used to clean and roughen the aluminum alloy surface, so that the aluminum alloy surface can obtain a certain degree of cleanliness and varying degrees of roughness.
3. Brushed metal Process
It refers to using sandpaper to repeatedly scrape the surface of the aluminum alloy until lines are scraped out. There are many types of wire drawing, such as straight strips, random threads, threads, spiral threads, etc. The surface of aluminum alloy that has been brushed can clearly see every line. At the same time, the metallic matt of aluminum alloy products will show a fine hair luster, making aluminum alloy products more fashionable. sense of technology and technology.
4. Polishing
It refers to using mechanical, chemical or electrochemical methods to polish the surface of aluminum alloy products, thereby reducing the surface roughness of aluminum alloy products and making the surface of aluminum alloy products smoother and brighter.
5. Powder Coating
By spraying on the metal workpiece, the powder forms a protective film on the surface of the workpiece through electrostatic adsorption. It is dispersed into uniform and fine droplets through a spray gun or disc atomizer with the help of pressure or centrifugal force, and is applied to the object to be coated Surface coating method.
6. Painting
It is a type of artificial paint, made of nitrocellulose, resin, pigments, solvents, etc. It is usually sprayed evenly on the surface of the object with a spray gun. It is resistant to water and engine oil and dries quickly. It is used to paint cars, airplanes, wood, leather, etc.
7. Electroplating
The process of plating a thin layer of other metals or alloys on certain metal surfaces using the principle of electrolysis is a process that uses electrolysis to attach a metal film to the surface of metal or other material parts to prevent metal oxidation (such as rust) improve wear resistance, conductivity, reflectivity, corrosion resistance (copper sulfate, etc.) and enhance aesthetics.
8. Anodizing
Using electrochemistry to generate an aluminum oxide film on the surface of aluminum and aluminum alloys, it has the advantages of protection, decoration, insulation and wear resistance.
9. Antibacterial Treatment
Best combination between safty and cleanness MediFocus offers the unique BioShield™ antimicrobial coating
technology to ensure that our medical trolleys meet challenging medical environmental requirements.
Post time: Dec-04-2023
